Eclipse 500 System Manual page 350

Section 14. Primary Flight Display (PFD)
NAV RADIOS
Primary Navigation Source Selection
The primary navigation reference is continuously displayed under the left side
line select key 1 and drives the green CDI pointer. Available selections are:
OFF, VLOC1, VLOC2 or FMS.
VLOC Selections
When a navigation source is selected to VLOC 1 or VLOC 2 for use in the
primary line select key window, VLOC 1, VLOC 2 text appears to the right of the
NAV text. The appropriate frequency and type of navaid (VOR, ILS) are
displayed below the NAV source. The ACS automatically identifies the frequency
by listening to the Morse code identifier comparing it to the navaid database.
When the frequency is positively identified the navaid identifier replaces the
numeric frequency. Selected course ("CRS xxx") is displayed on the bottom line
of the window. Also displayed within the primary NAV line select window is GPS
calculated distance (DME) from the selected navaid in NM.
When a navigation source is selected to FMS for use in the primary line select key
window, the text FMS appears to the right of the NAV text. The FMS course (DTK)
and distance to the next waypoint is displayed on the bottom line of the window.
330
Figure 217. Primary NAV Source Selection- VLOC
Copyright © — Eclipse Aviation Corporation
Eclipse 5OO Systems Manual
Version 2.0 April 2007