Eclipse 500 System Manual page 413

Section 15. Multi Function Display (MFD) Eclipse 5OO Systems Manual
transponder is selected at all times; this means that pressing the same key twice will
have no effect.
IDNT
Sets the selected transponder to . If the selected transponder is not in ON or ALT
mode, there is no effect.
XPDR SQWK
Allows the pilot to edit the Mode A code displayed in the CODE line select window on
the PFD. To change a code, press the XPDR SQWK and enter four digits using the
keyboard, then press ENTER. This will set the code in the CODE line select window.
SBY
Sets the selected transponder to Standby Mode
ALT
Sets the selected transponder to reply to ATC interrogations with both Mode A and
Mode C replies using whatever Mode A code is currently set.
ON
Sets the selected transponder to reply to ATC interrogations with the Mode A replies
using whatever Mode A code is currently set.
VFR
Sets the Mode A code of both transponders to 1200,
Copyright © — Eclipse Aviation Corporation
Version 2.0 April 2007
393