Eclipse 500 System Manual page 351

Section 14. Primary Flight Display (PFD) Eclipse 5OO Systems Manual
Figure 218. Primary NAV Source Selection- FMS
Secondary Navigation Source
The secondary navigation reference is continuously displayed under the left side
line select key 1 and drives the dual-line blue RMI pointer. Available selections
are: OFF, VLOC1, VLOC2 or FMS.
VLOC Selections
When a navigation source is selected to VLOC 1 or VLOC 2 for use in the
secondary line select key window, a VLOC 1, VLOC 2 appears to the right of the
BRG text. The appropriate frequency and type of navaid (VOR, ILS) are
displayed below the NAV source. The ACS automatically identifies the frequency
by listening to the Morse code identifier comparing it to the navaid database.
When the frequency is positively identified the navaid identifier replaces the
numeric frequency. Selected current bearing (BRG) is displayed on the bottom
line of the window. DME is not displayed in the BRG window.
Figure 219. Secondary NAV Source Selection- VLOC
When a navigation source is selected to FMS for use in the primary line select
key window, the text FMS appears to the right of the BRG text. The FMS bearing
to the next waypoint is displayed on the bottom line of the window. .
Copyright © — Eclipse Aviation Corporation
Version 2.0 April 2007
331