Eclipse 500 System Manual page 372

Section 15. Multi Function Display (MFD)
15.4 Tile 1 – MFD Attitude Direction Indicator (ADI)
The MFD ADI is available as a third source of flight information during normal and
abnormal operations, such as flight information disagreement or PFD failure. The
MFD ADI is configured similar to Tile 2 of the PFD, and displays the following
information.
Air Data Source Selection (ADC and AHRS)
Airspeed tape and digital airspeed readout (KEAS)
Mach digital display
Attitude Indicator
Slip/Skid Indicator
Altimeter tape and digital altitude readout (MSL)
Barometric altimeter setting
120˚ compass rose (magnetic heading)
The following information is NOT displayed on the MFD ADI
Flight Mode Annunciations (FMAs)
Airspeed upper or lower redlines
Airspeed and Altitude Trend Vectors
All Autopilot pre-select windows and bugs
Flight director command bars.
Localizer or Glide slope deviation indicators (HDI) and (VDI)
Vertical speed
V-speed bugs
Radar Altimeter
AOA indication
352
Figure 235. MFD ADI
Copyright © — Eclipse Aviation Corporation
Eclipse 5OO Systems Manual
Version 2.0 April 2007