Eclipse 500 System Manual page 382

Section 15. Multi Function Display (MFD)
15.6.2 Flap Position
The flap position indicator informs the pilot of the position of the flaps and is capable
of pointing to intermediate positions between the three commanded states.
When the flap lever is moved, a white box is displayed around the selected position.
The flap tick mark turns magenta until the flap position agrees with the flap lever
position, at which point the tick turns white and the white box disappears.
When the flap position matches the flap lever position, the display is white.
Flap asymmetry sensed by any flap actuator stops all flap movement, an CAS
caution message FLAP FAIL also appears and the flap pointer remains in the last
known position.
362
Figure 248. Flap Position (Normal)
Figure 249. In Transit to T/O Position
Figure 250. Flap Position Display (T/O Position)
Copyright © — Eclipse Aviation Corporation
Eclipse 5OO Systems Manual
Version 2.0 April 2007