Eclipse 500 System Manual page 309

Section 13. Air Data
d. None of the above
8. What information is collected by the Air Data Computers?
9. What are the three primary items comprise an Integrated Sensor Suite?
a.
b.
c.
10. In the event of a sensor disagreement, what can the pilot do to restore valid
data to their PFD?
a. They can look at the cross-side PFD
b. They can use the standby instruments on the MFD
c. They can change the air data source on the SENSOR synoptic page
d. All of the above
11. With the air data sources set in the AUTO position what will happen in the
event of a failure?
a. The pilot will be prompted by a CAS message that indicates the failed
component
b. The ACS will automatically select the operative source of air data
c. None of the above
d. A & B are correct
12. Which air data components are load shed during single generator
operation?
a. Left & Right Pitot/AOA heat, and Left & Right Static port heat
b. Left side Pitot/AOA heat only
c. Right side heat Pitot/AOA heat only
d. None of the above
Version 2.0 April 2007
Copyright © — Eclipse Aviation Corporation
Eclipse 5OO Systems Manual
289