Table of Contents
Advertisement
Section 14. Primary Flight Display (PFD)
XPDR Page Line Select Key Options
Line Select Key 1 (R1),
ACTIVE
Active Transponder (XPDR) Source .....................................................XPDR 1
Line Select Key 2 (R2),
CODE
Transponder Code Entry Field ......................... Set using right concentric knob
Line Select` Key 3 (R3),
MODE
Transponder mode selection...................................................... GND (Ground)
Line Select Key 4 (R4),
VFR Transponder Code Selection .. Pressing this line select key automatically
Line Select Key 5 (R5)
NO FUNCTION
Concentric Knob (RIGHT)
Inner Knob...................................................................................... CODE entry
Outer Knob..................................................................................... CODE entry
326
NOTE:
In both GND and SBY, the transponder will transition to altitude reporting
with weight-off-wheels, following takeoff and automatically transition back
to GND following touchdown
VFR
When the CODE line select field is highlighted, rotating the inner
knob changes the individual digits within the transponder code.
When the CODE line select field is highlighted, rotating the
outer knob moves the cursor between digits within
Copyright © — Eclipse Aviation Corporation
Eclipse 5OO Systems Manual
SBY (Standby)
changes transponder CODE to 1200
the transponder code.
Version 2.0 April 2007
XPDR 2
Advertisement
Chapters
Table of Contents
