Camera and Lighting Settings
Two Cameras can be connected to one Controller.
This section describes how to select the Camera to be used and set conditions for connected
Cameras.
l System Set./Camera/Lighting
1.
Make the settings for each item.
2.
Select OK.
Item
Active Port
Use Type
Shutter spd.lmt
Selections
CAMERA 0 (default),
CAMERA 1
Disconnect (Not connected.)
F160-S2 (Camera Only)
L2001 (V530-L2001),
L2002 (V530-L2002),
L2003 (V530-L2003)
1/120 (default), 1/200, 1/500,
1/1000, 1/2000, 1/4000, 1/8000,
1/16000, 1/30000, 1/60000
System Settings
Camera/Lighting
Active Port
:CAMERA 0
CAMERA 0
Use Type
:
F160-S2
Shutter spd.lmt
:
1/120sec
CAMERA 1
Use Type
:
Disconnect
Shutter spd.lmt
:
1/120sec
OK
Cancel
Description
Select the Camera to use to read input
images.
Select the models of Cameras connected to
CAMERA 0 and CAMERA 1.
Set the lowest shutter speeds for CAMERA 0
and CAMERA 1.
The optimum speed equal or higher than the
speed set here will be selected when teaching.
SECTION 5
V530-R2000
45
User's Manual