SECTION 7
Host Communications
1.
Using a flat-blade screwdriver, loosen the
screw for the power line on the connector.
2.
Insert the power line.
3.
Tighten the screw.
The tightening torque must be between 0.22 and
0.25 N·m.
4.
Insert the connector into the Controller.
5.
Tighten the screws.
The tightening torque must be between 0.22 and 0.25 N·m.
V530-R2000
86
User's Manual
Counterclockwise
Clockwise