Omron V530-R2000 User Manual page 13

PREFIX
n Turning OFF the Power Supply
Do not turn OFF the power supply while a message is being displayed indicating that
processing is being performed. Data in memory will be destroyed, and the V530-R2000
may not operate correctly the next time it is started.
n Using the RESET Signal
Do not use the RESET input immediately after power is turned ON. When using the
RESET input to synchronize execution timing, wait at least 1 second after turning ON
the V530-R2000 power supply before turning ON the RESET signal.
V530-R2000
xii
User's Manual
Teaching
Executing
(ESC:Cancel)