Omron V530-R2000 User Manual page 32

Wiring the Power Supply
Wire the Power Supply Unit independently of other devices. In particular, keep the
power supply wired separately from inductive loads.
Use a power supply with the following specifications.
Requirements
Output current Power supply voltage
1.6 A min. 20.4 to 26.4 VDC
Recommended Model
Model
S82-K05024
Use a DC power supply with safe extra-low-voltage circuits on the secondary side.
If UL recognition is required for the overall system, use a UL class II power supply.
· Keep the power supply cable as short as possible (10 m max.).
Cover the power supply with the terminal block cover. Attach the terminal block cover in its original
position after completing wiring. Be careful not to loose the terminal block cover when removing it.
Terminal block cover
(transparent)
24 VDC
Installation and Connections
V530-R2000
2D CODE READER
24VDC
24VDC
SECTION 2
V530-R2000
15
User's Manual