Omron V530-R2000 User Manual page 122

n Mounting the Reading Head
Align the direction of the lighting with the workpiece, loosen the three screws with the
enclosed Allen wrench, change the direction, and then retighten the screws. Do not
allow the Reading Head to fall when loosening the screws. Also, be sure to tighten the
screw sufficiently. If they are not tight, the direction of the lighting may change, the
Reading Head may fall, or it may be difficult to connect to or disconnect from the C
mount.
The focal point of the zoom lens is fixed. There are differences in the position of the CCD that create
differences in the focal point for each Camera. Mount the Camera so that the installation distance
can be adjusted in the direction of the optical axis.
Tighten the zoom bar so that the set field of vision does not change.
Zoom bar
0
180
90
Screw (3 locations)
Tighten
SECTION 9
Appendix
Loosen
V530-R2000
105
User's Manual