@GM
Function
Switches the trigger mode.
A trigger is not input; only the mode is changed.
Input
@ G M
Specify the trigger mode as follows:
Trigger mode
0
1
2
Output
O K
Output communications commands specifying a level trigger until reading is suc-
cessful. When using a level trigger form the input terminal, however, commands
will not be output when readings fail while being processed.
A one-shot trigger will be set automatically when the multidrop setting is set to
ON.
@GR
Function
Switches the read mode.
Input
@ G R
Specify the read mode as follows:
Trigger mode
0
1
2
3
Output
O K
Trigger mode
Description
One-shot trigger
Continuous trigger
Level trigger
Read mode
Description
Normal mode
Wide range mode
Lighting mode
Move mode
SECTION 7
Host Communications
V530-R2000
User's Manual
69