Omron V530-R2000 User Manual page 37

SECTION 3
Basic Operations
The Start Setting Screen will be displayed.
5.
Select Start Setting to set the conditions
from the beginning.
Select Upload Settings to use settings uploaded from
another Controller.
p.21
The Menu Screen will be displayed.
6.
Set the read conditions.
Refer to SECTION 4 Setting Read Conditions.
After setting the read conditions and before turning OFF the power supply, save the settings in the
flash memory in the Controller.
If data has been saved in flash memory, the screens in steps
Read Screen will be displayed instead.
V530-R2000
20
User's Manual
p.22
Start Setting
Upload Settings
Menu
Read Set.
System Set.
Option
Language
Save
4. 6.
to will not be displayed and the