Set Priority Level - American Dynamics AD2052 System Programming Manual

SET PRIORITY
The SET PRIORITY menu is used to define the configuration
for each of the eight priority levels. All levels default to the
same configuration. Each priority level can be configured as
desired. Once the levels have been defined, the desired
priority level may be applied to individual users and/or
keyboards.
S E T P R I O R I T Y
L E V E L
A D D U S E R
S Y S T E M R E S E T
L O C K C A M A B I L I T Y
U T I L I Z E V / C A C C E S S
M E N U A C C E S S
C H A N G E PA R A M E T E R S
P R E V I O U S M E N U
Each level consists of the following user function definitions:
Add User, System Reset, Lock Cam Ability, Override
View/Control, Menu Access, and Change Parameters. Each
function is either enabled (Y) or disabled (N).
LEVEL - Selects one of eight priority levels to define.
To configure a Priority Level:
1. Move the cursor to the LEVEL line.
2. Select a priority level number (1-8).
3. Press the ACK key to select this priority level and move to
the next menu line item.
See page 4-3 for cursor positioning instructions, to move to a
selected menu line item within each level.
P R I O R I T Y
1 . U S E R I D E N T I F I C AT I O N
2 . S E T U S E R
3 . S E T P R I O R I T Y
R E T U R N M A I N
Press the ACK key to toggle between ENABLED (Y) or
DISABLED (N) in each of the following menu lines.
ADD USER - If enabled, it allows a new user to be added.
The USER IDS must be enabled, see page 4-27. Also, see Set
User Menu, page 4-28.
SYSTEM RESET - If enabled, the selected priority level can
reset the system by keyboard commands. See System Reset,
page 3-2, for the keyboard commands.
LOCK CAM ABILITY - If enabled, the selected priority
level can lock the control of a camera by keyboard commands.
See Camera Lockout, page 3-3 for these keyboard commands.
UTILIZE/OVERRIDE VIEW CONTROL - The following
two menu functions toggle between each other.
UTILIZE V/C ACCESS - If enabled, the system uses the
access tables for system partitioning and the selected
priority level cannot override the access tables. If disabled,
the menu line displays "OVERRIDE VIEW CONTROL".
OVERRIDE VIEW CONTROL - If enabled, the selected
priority level can override the Keyboard/Camera View and
Control Access Tables access restrictions. If disabled, the
menu line displays "UTILIZE V/C ACCESS".
MENU ACCESS - If enabled, the selected priority level has
access to the programming menus through the keyboard. This
function must be enabled to enable Change Parameters, below.
CHANGE PARAMETERS - If enabled, the selected priority
level can change system data through the menus. If Menu
Access (above) is disabled for this priority level, Change
Parameters is disabled and cannot be enabled.
PREVIOUS MENU - Returns to the PRIORITY menu.
4-29
MENU PROGRAMMING