Set System Salvos - American Dynamics AD2052 System Programming Manual

MENU PROGRAMMING

SET SYSTEM SALVOS

A System Salvo is a group of cameras that can be called
simultaneously to a contiguous group of monitors. A salvo can
be called manually via keyboard commands, automatically
when included in a System Tour or another System Salvo, or
on alarm when included in an Alarm Contact setup.
The SET SYSTEM SALVOS menu permits programming of
64 individual System Salvos. The maximum number of
cameras in a System Salvo is 16. Note that System Salvos can
be nested within other System Salvos.
S E T S Y S T E M S A LV O S
S A LV O - 0 1
P O S C A M
1 0 0 0 1
2 0 0 0 2
3 0 0 0 3
4 0 0 0 4
5 0 0 0 5
6 0 0 0 6
.
.
.
1 6 0 0 1 6
P R E V I O U S M E N U
POS (Position) - The salvo Position refers to the order of the
cameras displayed on the contiguous monitors. Each position
of the salvo identifies a camera with an optional preset scene
and auxiliary action for this camera. Note that System Salvos
can be nested within other System Salvos.
CAM (Camera) - A camera number is associated with each
salvo position. This camera is displayed on the next
contiguous monitor. If the CN field is "S", the CAM entry is
associated with another System Salvo, and the Camera number
is a System Salvo number (a nested Salvo).
1 S E T T I M E A N D D AT E
2 S E T S Y S T E M TO U R S
3 S E T S Y S T E M S A LV O S
4 S E T E V E N T T I M E R S
5 S E T A L A R M C O N TA C T S
6 M O N I TO R S TAT U S
R E T U R N M A I N
P R E A U X C N
0 0 0 - Y
0 2 2 O N Y
0 3 3 O N Y
0 4 4 O N Y
7 0 3 O N Y
0 0 0 - Y
7 2 1 O F F N
S Y S T E M
PRE (Preset) - If the camera site is equipped for preset scenes
(see page 3-3) a preset scene, from 1 to 72, may be specified
for this salvo position. The preset scene specified is called
automatically when the camera associated with this salvo
position is called. If a preset is not desired, enter a zero in this
field.
AUX (Auxiliary) - If the camera site is equipped with a
Receiver that has Auxiliary relays, an auxiliary can be
activated automatically by this salvo position. The number and
type of auxiliary functions at a site depends on the options
installed in the camera Receiver. If no auxiliary is desired,
enter a zero in this field.
CN (Connect Next) - Connect Next selects the next camera
position in the menu for simultaneous callup to the next
contiguous system monitor, thereby forming the salvo.
A selection of Yes ("Y"), No ("N"), or Salvo ("S") can be
chosen for Connect Next.
• If "Y" is selected, the next camera in the menu is included in
the salvo, and is called to the next contiguous monitor.
• If "N" is selected, the salvo stops at this camera position.
• If "S" is selected, another System Salvo is called and this
salvo stops at this position.
NOTE: On the first Salvo position line, if an actual camera
number matches the salvo number, only "Y" or "N" can
be selected for Connect Next. On the last Salvo entry line
only "N" or "S" can be selected for Connect Next.
PREVIOUS MENU - Returns to the SYSTEM menu.
4-8