Camera Menus; Pseudo - American Dynamics AD2052 System Programming Manual

MENU PROGRAMMING
CAMERA MENU
The CAMERA menu is used to re-assign camera numbers, to
program camera titles, and to setup camera Video Loss
Detection modes. Each entry of the Camera menu brings up
another menu, as shown below and on page 4-19.
The RETURN MAIN line of the Camera menu returns to the
Main Selection menu, page 4-2.

PSEUDO

Use the PSEUDO menu to assign specific (Pseudo) camera
numbers that are different from the actual camera number. The
actual (Real) camera number is the number associated with the
individual input BNC on the rear panel of each 2052 switching
bay Video Input Module.
This menu has multiple pages, with 16 camera numbers per
page. See page 4-3 for menu paging instructions.
A S S I G N P S E U D O C A M E R A S
C A M E R A
R E A L #
0 0 1
0 0 2
0 0 3
0 0 4
0 0 5
0 0 6
0 0 7
0 0 8
.
.
.
0 1 6
P R E V I O U S M E N U
C A M E R A
1 P S E U D O
2 T I T L E
R E T U R N M A I N
P S E U D O #
0 0 0 1
0 0 0 2
0 1 0 3
0 1 0 4
0 1 0 5
5 0 0 6
0 2 0 7
0 2 0 8
0 0 1 6
4-18
The Pseudo camera numbers default to the Real video input
BNC numbers, 1 - 512. The Pseudo numbers may be changed
to any numerical value from one to 9999. This allows groups
of cameras to be associated by numerical value.
For example: A 2-story building has ten cameras per floor.
Floor 1 cameras may be assigned numbers 100 through 110.
Floor 2 cameras may be assigned numbers 200 through 210.
To Assign/Change a Pseudo Camera Number:
1. Position the cursor to the desired REAL # line for the
desired camera number to be changed.
2. Enter the new PSEUDO number (1 - 9999) assigned to this
REAL number.
3. Press the ACK key.
Note: Selecting a PSEUDO number that is already assigned to
another real camera number results in a switch of the
two numbers.
For example: If REAL # 001 is assigned PSEUDO #
0025, then REAL # 025 is automatically reassigned to
PSEUDO # 0001.
Note: On a system reset (page 3-2) all PSEUDO numbers are
reset to match the REAL camera numbers.
To locate a Pseudo number in the menu:
1. Enter the desired Real camera number on the keypad.
2. On a 1678CM keyboard, press either the OFF or ARM key
in the Camera section of the keyboard.
or
On a 2078 keyboard, press either PAGE up/down button in
the IRIS section of the keyboard.
The Pseudo Camera menu then displays the page containing
the desired Real number.
The PREVIOUS MENU line of the Pseudo Camera menu
returns to the CAMERA menu.