On-Screen Status Line Displays - American Dynamics AD2052 System Programming Manual

APPENDIX

ON-SCREEN STATUS LINE DISPLAYS

Setup/Programming
The following messages appear in the monitor on-screen Status
Line during certain non-menu programming functions.
SUN, MON, TUE, WED, THR, FRI, SAT - displayed
during setup of Day of the Week, page 3-2. The
appropriate code is displayed after the selection is made.
DELTD - displayed during Monitor Tour programming, page
3-4. This message indicates that a tour entry was just
deleted by the "0 - PROG" action.
TR CLR - displayed during Monitor Tour programming, page
3-4. This message indicates that the Monitor Tour was just
completely erased by the "62 - PROG" action.
nnnnE - displayed during Contact Arming, page 3-6. This
message indicates the alarm contact number and the letter
"E" for alarm contact enabled.
nnnnD - displayed during Contact Disarming, page 3-6. This
message indicates the alarm contact number and the letter
"D" for alarm contact disabled.
SSI, SSA, SSMA, SHI, SHA, SHMA, BSI, BSA, BSMA,
BHI, BHA, BHMA, DHI, DSI, DHA, DSA, DHMA,
DSMA, DIS - displayed during Monitor Arming, page 3-5.
The message code indicates the Arming Code that the
monitor is armed for. See Appendix pages A-6 and A-7 for
descriptions of these codes.
UFnan - displayed following entry of the "70 F2" code
combination on the keyboard. This message displays the
current software version number as the last digit of the
message (e.g., "UF3M2" is version 2 of the embedded
software).
Operation
The following messages appear in the monitor on-screen Status
Line during normal 2052 operation.
ALARM - displayed while an armed alarm contact is active
(see Appendix page A-3). This message remains displayed
until the alarm contact is cleared or the alarm is manually
acknowledged, depending on the alarm clearance mode of
the monitor (see Appendix page A-4).
ACK nn - displayed when the operator presses the ACK key
to start a System Tour, page 2-4. This message indicates
the System Tour number selected, and is displayed until the
first camera of the tour is called to the monitor.
nnF - displayed during System Tour operation, page 2-4. The
message shows the dwell time (nn seconds) of the currently
displayed camera, and the letter "F" for a tour running in a
Forward direction.
nnR - displayed during System Tour operation, page 2-4. The
message shows the dwell time (nn seconds) of the currently
displayed camera, and the letter "R" for a tour running in a
Reverse direction.
HOLD - displayed during a Tour hold, page 2-4. The
message indicates that the tour is on hold at the displayed
camera.
SALVO - displayed when a System Salvo has been called,
page 2-4. The message indicates that a System Salvo has
been called to this monitor.
LOCK - displayed under the following conditions (this
camera cannot be controlled by the keyboard while this
message is displayed):
- When another keyboard is controlling the same camera
(pan/tilt/lens/preset/aux), page 2-3.
- When the camera has been Locked Out by another
keyboard, page 3-3.
NO CTRL - displayed when a user tries to call a camera that
has been denied access from that keyboard (set to "N") via
the Keyboard/Camera View access menu, page 4-23.
A-8