American Dynamics AD2052 System Programming Manual page 29

PROGRAMMING A SALVO
To select a System Salvo for programming:
1. Move the cursor to the SALVO number line at the top of the
SET SYSTEM SALVOS menu.
2. Enter the desired salvo number (1 - 64) to program.
3. Press the ACK key.
See page 4-3 for cursor movement instructions.
CAM (Camera)
To add or change a camera in a salvo:
1. Move the cursor to the appropriate CAM column and salvo
position line.
2. Enter the desired camera number (1 - 512 for Real camera
numbers or 1 - 9999 for Pseudo numbers). If the CN field
is set to "S", enter a System Salvo number (1 - 64).
3. Press the ACK key.
Note: To eliminate a particular camera from a salvo, press the
ACK key without entering a number in the CAM field.
PRE (Preset)
If a preset scene is desired for the camera:
1. Move the cursor to the PRE column and desired camera
position line.
2. Enter the preset number (1 - 72) to call for this camera.
Zero represents no preset call for this entry.
3. Press the ACK key.
AUX (Auxiliary)
If an auxiliary action is desired for an entry:
1. Move the cursor to the AUX column and desired camera
position line.
2. Press the ACK key to cycle through the available AUX
options and press the NEXT key to accept the displayed
selection.
or
Enter one of the following numbers and press the ACK key.
The auxiliary selection will appear in the AUX column.
1 = 1 ON
2 = 2 ON
3 = 3 ON
4 = 4 ON
5 = 1 OFF
6 = 2 OFF
7 = 3 OFF
8 = 0 - (no action)
CN (Connect Next)
To include the next camera, or another System Salvo:
1. Move the cursor to the CN column and the desired camera
position line.
2. Press the ACK key to cycle through the CN selections: "Y",
"N", or "S". Press the NEXT key to accept the displayed
selection.
or
Enter one of the following numbers and press the ACK key.
The selection will display in the CN column entry.
1 = N, no connect next
2 = Y, connect to the next entry
3 = S, call a System Salvo
All entries in a System Salvo should have the CN entry set to
Y except the last entry, which is set to N or S.
Notes: If a System Salvo is selected (S), the CAM number for
this position must be set to the desired Salvo number.
If Pseudo numbers are used, the CAM number switches
between Pseudo numbers when N or Y is selected and
Real numbers when S is selected.
Example: Set Salvo number 1, position 5 to Camera number
17, Preset number 5, Auxiliary 3 ON, and Connect Next to
the next camera (position 6). Position 6 is the last camera
(camera number 18) in this salvo.
S E T S Y S T E M S A LV O S
P O S C A M
1 0 0 0 1
2 0 0 0 2
3 0 0 0 3
4 0 0 0 4
5 0 0 1 7
6 0 0 1 8
.
.
1 6 0 0 1 6
P R E V I O U S M E N U
CALLING A SYSTEM SALVO
To call a System Salvo from a keyboard:
1. Call the first monitor of the desired group of monitors.
2. Enter the desired System Salvo number (1-64).
3. Press the Salvo key. The cameras, presets, and auxiliaries
associated with that salvo are displayed on the selected
monitors, up to the nth contiguous monitor.
4-9
MENU PROGRAMMING
S A LV O - 0 1
P R E A U X
0 0 0 -
0 2 2 O N
0 3 3 O N
0 4 4 O N
0 5 3 O N
0 0 0 -
0 0 0 -
C N
Y
Y
Y
Y
Y
N
N