American Dynamics AD2052 System Programming Manual page 34

MENU PROGRAMMING
AUX (Auxiliary)
If an auxiliary action is desired for an ACN entry:
1. Move the cursor to the AUX column and desired ACN.
2. Press the ACK key to cycle through the available auxiliaries
actions. Press the NEXT key to accept the displayed
selection.
or
Enter one of the following auxiliary selection numbers and
press the ACK key. The auxiliary selection will appear in
the AUX column.
1 = 1 ON 5 = 1 OFF
2 = 2 ON 6 = 2 OFF
3 = 3 ON 7 = 3 OFF
4 = 4 ON 8 = 0 -
Example: To set Aux 1 ON for ACN 007.
A L A R M C O N TA C T S E T U P
A C N C A M
0 0 0 1 0 0 0 1
0 0 0 2 0 0 0 2
0 0 0 3 0 0 0 3
0 0 0 4 0 0 0 4
0 0 0 5 0 0 0 5
0 0 0 6 0 0 0 6
0 0 0 7 0 0 1 7
0 0 0 8 0 0 0 8
.
.
0 0 1 6 0 0 1 6
P R E V I O U S M E N U
Note: Different alarm contacts entries (ACNs) may be
associated with the same camera, with different auxiliary
and preset scene calls. If more than one of these alarm
contacts is received during the same time period, the system
will activate each preset and auxiliary for the same camera
in the order that the alarms are received, stopping at the
preset and auxiliary of the last received alarm contact.
In this instance, the operator may not see the first preset or
auxiliary action(s).
CN (Connect Next)
For salvo switching on alarm contact receipt:
1. Position the cursor to the desired CN column and ACN.
2. Press the ACK key to cycle through the available CN
selections: N, Y, S, W, N*, Y*, S*, and W*. Press the
NEXT key to accept the displayed selection.
or
(no action)
D W L P R E A U X
0 2 0 0 0 -
0 2 0 0 0 -
0 2 0 0 0 -
0 2 0 0 0 -
0 2 0 0 0 -
0 2 0 0 0 -
3 0 0 5 1 O N
0 2 0 0 0 -
0 2 0 0 0 -
Enter a number for one of the following selections and
press the ACK key. (The second number of each selection
adds the "*" feature to the CN selection, e.g., 8 = W*.)
1, 5 = N, no connect next
2, 6 = Y, connect the next entry in a salvo
3, 7 = S, call a System Salvo
4, 8 = W, activate all contiguous ACN entries
If Connect Next (Y) is selected, the dwell times for the salvo
group is controlled by the first entry of the group. The dwell
time for all but the first entry in the salvo group may be left
blank. All entries in a connect next sequence should have the
CN value set to Y, except the last entry which is set to N or S.
If System Salvo (S) is selected, the CAM number for this entry
line must be set to the desired System Salvo number.
If Wired (W) is selected, all contiguous Wired ACN entries in
the table are activated when any alarm contact of the set is
received. Each ACN in the set is then handled as a separate,
C N
active alarm for the monitor it is armed to.
N
N
- All contiguous ACN entries in a Wired set must have the
N
CN value set to W, except the last entry which is set to N or
N
S. The last entry (N or S) is also activated as part of the
N
Wired set. More than one Wired set may be specified in the
N
ACN table; an alarm contact received in one Wired set does
N
not activate any other alarm contacts in other Wired sets.
N
- The "*" symbol is used in Wired set ACN entries only.
When an ACN with a "*" is manually Acknowledged, all
N
alarm contacts in that Wired set are cleared. A manual
Acknowledge for any ACN which does not include the "*"
will clear that ACN only. Any or all ACN entries in a
Wired set may include this symbol in the CN field.
Note: If Pseudo numbers are used, the CAM number switches
between Pseudo numbers when N, Y, or W is selected
and Real numbers when S is selected.
Example: Define ACN 1 as the start of a 3 camera salvo, and
ACNs 6 - 8 as a Wired set. Manual Acknowledge of ACN
7 clears all three ACNs in this set.
A L A R M C O N TA C T S E T U P
A C N
0 0 0 1
0 0 0 2
0 0 0 3
0 0 0 4
0 0 0 5
0 0 0 6
0 0 0 7
0 0 0 8
.
0 0 1 6
4-14
C A M D W L P R E
0 0 0 1 0 2 0 0
0 0 0 2 0 2 0 0
0 0 0 3 0 2 0 0
0 0 0 4 0 2 0 0
0 0 0 5 0 2 0 0
0 0 0 6 0 2 0 0
0 0 1 7 3 0 0 5
0 0 0 8 0 2 0 0
0 0 1 6 0 2 0 0
P R E V I O U S M E N U
A U X C N
0 - Y
0 - Y
0 - N
0 - N
0 - N
0 - W
1 O N W *
0 - N
0 - N