Main Selection Menu; Menu Programming; Accessing The Menu System; Exiting From The Menu System - American Dynamics AD2052 System Programming Manual

MENU PROGRAMMING

MENU PROGRAMMING
All the features of the 2052 are programmable through on-
screen menus. The menus are displayed via a separate video
output, labeled PROG MON, on the rear of the 2052CPM.
This video output may be connected to a separate monitor, or
connect back into the video switching system for display on
any system monitor. Until the menu system is started, this
output displays the following message on a blank screen.
ENTER CODE TO ACCESS MENUS

Accessing the menu system

Access to menu programming is possible only from a 1678CM
or 2078 keyboard.
Note: As a security feature these keyboards have a keyswitch
which disables all setup functions when set to OFF.
To access the menus from a 1678CM Series keyboard:
1. Turn the keyswitch to the Program (horizontal) position.
2. Enter 129 on the keypad.
3. Press the PROG button on the keyboard.
To access the menus from a 2078 Series keyboard:
• Place the 2078 keyswitch in the DISP position.
Following these procedures, the MAIN SELECTION menu is
displayed (next column).

Exiting from the menu system

When menu programming is completed, the user can exit from
the menu system from any menu displayed.
To exit the menu system from a 1678CM Series keyboard:
1. Enter 130 on the keypad.
2. Press the PROG button on the keyboard.
To exit the menu system from a 2078 Series keyboard:
• Place the 2078 keyswitch in the OFF or PROG position.
SYSTEM
1 SET TIME AND DATE
2 SET SYSTEM TOURS
3 SET SYSTEM SALVOS
4 SET EVENT TIMERS
5 SET ALARM CONTACTS
6 MONITOR STATUS
RETURN MAIN
MONITOR CAMERA
ARM TYPE ACK 1 PSEUDO
TOUR 2 TITLE
TIME DATE RETURN MAIN
TITLE DISPLAY
CAM TITLE LCK
MON TITLE LCK
DISPLAY STATUS
RETURN MAIN
MAIN SELECTION
- - - - - - - - - - - - - -
1 SYSTEM
2 MONITOR
3 CAMERA
4 PORTS
5 ACCESS
6 PRIORITY
MAIN SELECTION
After the menu system is accessed, the MAIN SELECTION
menu is displayed, via the PROG MON output, indicating the
setup functions available.
To select a MAIN SELECTION menu function:
1. Move the cursor to the desired line.
or
Enter the number (1 - 6) for the desired line.
2. Press the ACK button to access that selection.
Each selection of the Main Selection menu brings up another
menu, as illustrated at the bottom of this page. Refer to the
following pages for each menu.
SYSTEM
MONITOR
CAMERA
PORTS
ACCESS
PRIORITY
In each of these menus, move the cursor to the RETURN
MAIN line and press the ACK key to return to the MAIN
SELECTION menu.
(See cursor positioning instructions, next page.)
PORT ACCESS
BAUD 1 KEYBOARD/MONITOR
DATA BITS 2 KEYBOARD/CAMERA VIEW
PARITY 3 KEYBOARD/CAMERA CONTROL 3 SET PRIORITY
STOP BITS 4 MONITOR/CAMERA ACCESS
PORT USE 5 MONITOR/CONTACT ACCESS
RETURN MAIN RETURN MAIN
4-2
pages 4-3 to 4-15
pages 4-16 to 4-17
pages 4-18 to 4-19
pages 4-20 to 4-21
pages 4-22 to 4-26
pages 4-27 to 4-29
PRIORITY
1 USER IDENTIFICATION
2 SET KEYBOARD/USER
RETURN MAIN