Set Alarm Contacts - American Dynamics AD2052 System Programming Manual

MENU PROGRAMMING

SET ALARM CONTACTS

The SET ALARM CONTACTS menu is used to associate
cameras to alarm contacts (see Alarms, Appendix pages A-3 to
A-7). A maximum of 1024 entries are allowed. Each Alarm
Contact Number (ACN) is associated with a camera number,
dwell time, and optional preset, auxiliary, and connect next for
salvo call on alarm.
This menu has multiple pages, with 16 ACN's per page. Refer
to page 4-3 for menu paging instructions.
A L A R M C O N TA C T S E T U P
A C N C A M
0 0 0 1 0 0 0 1
0 0 0 2 0 0 0 2
0 0 0 3 0 0 0 3
0 0 0 4 0 0 0 4
0 0 0 5 0 0 0 5
0 0 0 6 0 0 0 6
0 0 0 7 0 0 1 7
0 0 0 8 0 0 0 8
.
.
0 0 1 6 0 0 1 6
P R E V I O U S M E N U
ACN (Alarm Contact Number) - Each of the 1024 ACN
entries is unique and consists of a camera number, dwell time,
preset, auxiliary, and connect next that are activated when this
contact is received. The same camera may be associated with
different ACN's with different dwell times, presets, etc.
CAM (Camera) - This identifies the camera that is called to
the monitor associated to this ACN (Monitor/Contact Access
Menu, page 4-26) when the alarm contact is received. If the
CN field is "S", the CAM entry is associated with System
Salvos, and the Camera number is a System Salvo number.
DWL (Dwell Time) - Dwell Time sets the amount of dwell for
the camera. The dwell time may be from 1 to 60, in seconds.
An entry of 61 will "HOLD" the current camera displayed.
1 S E T T I M E A N D D AT E
2 S E T S Y S T E M TO U R S
3 S E T S Y S T E M S A LV O S
4 S E T E V E N T T I M E R S
5 S E T A L A R M C O N TA C T S
6 M O N I TO R S TAT U S
D W L P R E A U X
0 2 0 0 0 -
0 2 0 0 0 -
0 2 0 0 0 -
0 2 0 0 0 -
0 2 0 0 0 -
0 2 0 0 0 -
0 2 0 0 0 -
0 2 0 0 0 -
0 2 0 0 0 -
S Y S T E M
R E T U R N M A I N
PRE (Preset) - If the camera site is equipped for preset scenes
(see page 3-3) a preset scene, from 1 to 72, may be specified
for this salvo position. The preset scene specified is called
automatically when the camera associated with this alarm
contact is called. If a preset is not desired, enter a zero in this
field.
AUX (Auxiliary) - If the camera site is equipped with a
Receiver that has Auxiliary relays, an auxiliary can be
activated automatically on alarm receipt. If no auxiliary action
is desired, enter a zero in this field.
C N
CN (Connect Next) - Connect Next selects the next camera in
N
the table for simultaneous callup when the alarm contact is
N
received. "N" (No), "Y" (Yes), "S" (Salvo), or "W" (Wired
N
Set) can be selected for Connect Next.
N
• If "N" is selected, the Connect Next feature is not initiated.
N
N
The next ACN entry in the table is used for an alarm contact.
N
• If "Y" is selected, the Connect Next feature calls the next
N
table entry to the next contiguous monitor, for the dwell time
specified by the first camera entry; the next ACN is no
N longer active and cannot be used for an alarm contact. (The
last entry of a Y set must have an "N" or "S" CN entry.)
• If "S" is selected, a pre-programmed System Salvo is called.
The System Salvo number is specified in the CAM entry.
• If "W" is selected, the Connect Next feature activates all
ACN entries in a contiguous set when that alarm contact is
received; each ACN entry in the contiguous set is still active
for the associated alarm contact. (The last entry of a Wired
set must have an "N" or "S" CN entry.)
In addition, each CN selection in a contiguous Wired set
may include an "*" symbol. This indicates that when the
associated ACN is manual Acknowledged, all alarm contacts
in that Wired set are cleared.
PREVIOUS MENU - Returns to the SYSTEM Menu.
4-12