Set Time And Date - American Dynamics AD2052 System Programming Manual

MENU PROGRAMMING

SET TIME AND DATE

Use the SET TIME AND DATE menu to set the date format,
date, time, and day of the week for all on-screen displays.

SET TIME AND DATE

DATE FORMAT - MM-DD-YY
DATE - 09-20-91
TIME - 16:57:26
DAY OF WEEK - TUE
PREVIOUS MENU
DATE FORMAT - Selects the system display date format.
1. Place the cursor on the DATE FORMAT line.
2. Press the ACK key to cycle through each date format.
Press the NEXT key to accept the displayed selection.
or
Enter the number which corresponds to the desired format
and press the ACK key.
1 - MM-DD-YY
2 - DD-MM-YY
3 - YY-MM-DD
Note that the presentation of the date in the next menu line
(DATE) changes to correspond to the format selected.
DATE - Displays the date in the format selected (above).
1. Place the cursor on the DATE line.
2. Enter the first two digits of the date based on the format
selected and press the ACK key.
3. Enter the second pair of digits based on the format selected
and press the ACK key.
4. Enter the third pair of digits based on the format selected
and press the ACK key.
Note: Pressing the ACK key without entering a number
results in a "00" entry for that item.
S Y S T E M
1 S E T T I M E A N D D AT E
2 S E T S Y S T E M TO U R S
3 S E T S Y S T E M S A LV O S
4 S E T E V E N T T I M E R S
5 S E T A L A R M C O N TA C T S
6 M O N I TO R S TAT U S
R E T U R N M A I N
Date Example: Using the MM-DD-YY format, enter the
date 09-30-91.
Enter 09 on the keypad and press the ACK key.
Enter 30 on the keypad and press the ACK key.
Enter 91 on the keypad and press the ACK key.
TIME - Displays the time, in 24-hour format, as HH:MM:SS
(hour:minute:second).
1. Place the cursor on the TIME line.
2. Enter the current time similar to the DATE entry procedure,
starting with hour (HH). Press the ACK key after each pair
of digits.
Note: Enter time in 24-hour format.
Time Example: Set the time to read 14:17: 28:
Enter 14 on the keypad and press the ACK key.
Enter 17 on the keypad and press the ACK key.
Enter 28 on the keypad and press the ACK key.
DAY OF WEEK - Displays the day of the week.
1. Place the cursor on the DAY OF WEEK line.
2. Press the ACK key to cycle through the days of the week.
Press the NEXT key to accept the displayed selection.
Enter the number which corresponds to the desired day of
the week and press the ACK key.
PREVIOUS MENU returns to the SYSTEM menu, page 4-3.
See page 4-3 for cursor movement instructions.
4-4
or
1 - SUN 4 - WED
2 - MON 5 - THR
3 - TUE 6 - FRI
7 - SAT