System Setup - American Dynamics Intellex DV8000 Installation And Operating Instructions Manual

®
Intellex Digital Video Management System Installation and Operating Instructions

SYSTEM SETUP

STARTING
THE INTELLEX
UNIT
System Setup
CAUTION: Before connecting power, set the voltage switch
to the appropriate voltage ("115" or "230").
To start up the Intellex unit, simply plug it in. If the unit does not
power up, insert the special tool provided (or a paper clip) in the
pinhole beneath the power indicator to turn on unit power.
CAUTION: Do NOT modify any BIOS or system settings. Do
NOT reconfigure any hard drives. Otherwise you will
affect unit operation.
During the power-up cycle, the Intellex splash screen appears. If
you are powering up the unit for the first time, a message may
appear with the splash screen. Do not press any buttons on the
front panel or any keys on the keyboard until this screen
disappears.
Wait at least two minutes for the message and/or the splash
screen to disappear. Otherwise, you may interrupt the startup
process and affect unit operation. If the splash screen does not
disappear after two minutes, see the Intellex Troubleshooting Guide.
CAUTION: Do NOT install any other software, including
screen savers, or you will affect unit operation.
When the main screen appears, the unit begins showing live
video from the attached cameras, based on the schedule.
NOTE: Security is disabled at the factory. However, if the unit
displays the login screen, enter the administrator's default
PIN code (1234). See
more information.
When installing the unit, configure the unit in the following
order:
Regional Settings
Mouse Settings
Time Zone Settings
Network Settings
Language Setup
Logging In and Changing Users
(for Network Client only)
15
for
MORE>>>