Solid State Relay (Lighting) Replacement Instructions - Henny Penny SmartCombi ESC 615 Replacement Instructions Manual

SmartCombi™ & ClassicCombi™ Service

Solid state relay (lighting) replacement instructions

Valid for:
SmartCombi MM203669
Arrangements:
Disconnect the unit from the power supply. Unlock and open front panel as well or remove left side
wall.
Disassembling:
Unmount solid state relay (SSR (10A)) [1].
➢
Assembling:
Clean heat sink surface (Remove heat conductor
➢
foil).
Connect wires to the new SSR.
➢
Mount SSR with new heat conductor foil on the
➢
heat sink [3]( #203671).
Final function test.
➢
Close and lock front panel as well as mount the side
➢
wall.
1
No.18 HD_04/2008
2
30