2 Safety Instructions - Henny Penny FlexFusion Spacesaver Installation Manual

Safety instructions
2 Safety instructions
Ensuring conformity with
standards
Improper installation Risk of property damage and personal injury from improper
Transportation and storage Risk of personal injury and property damage from improper
Fire prevention Risk of fire from combustible surfaces
Organizational measures Risk of property damage and personal injury from lack of
8
The unit complies with applicable safety standards. Residual risks
associated with operation or risks resulting from incorrect operation
cannot be ruled out and are mentioned specifically in the safety
instructions and warnings.
The installation fitter must be familiar with regional regulations and
observe them.
The installation fitter must observe the safety instructions in these
installation instructions and in the "Safety information" chapter of the
operating instructions.
Observe applicable international, European and national laws,
regulations, standards and directives for the unit when transporting,
setting up and connecting it.
installation
• Install the unit only as specified in these installation instructions.
• Do not add anything to the unit or modify the unit.
• Use only original spare parts.
transportation and improper storage
• Store the unit in a dry, frost-free environment.
• Observe the safety regulations for the lifting gear used.
• Attach the unit to the lifting gear securely during transport and
installation, and prevent it from dropping.
• Transport the unit in an upright position, do not tilt or stack.
• Pay attention to protruding parts when transporting the unit
without packaging.
• Observe general fire prevention regulations.
organizational measures
• Identify danger zones when transporting, installing and connecting
the unit.
• Prior to starting the installation tasks, notify any operator present
about the procedure.
• Prior to starting the installation task, discuss how to behave in an
emergency.
• Use equipment and protective gear suitable for the activity.
• Brace housing components to prevent them from falling over and
dropping.
Installation instructions