Henny Penny SmartCombi ESC 615 Replacement Instructions Manual page 35

SmartCombi™ & ClassicCombi™ Service
Assembling:
Assembly overview of the gaskets
The assembly has to be
➢
replaced. Use Anti-Seize for the screws / nuts [1,3,4].
Locking torques:
Gas blower flange [3,4] 5Nm.
Venturi air mixing pipe [1] 3Nm.
Mount gas valve according to mounting information No.21 HD_02/2008.
➢
Finally, a gas leakage testas well the CO2 calibration has to be carried out! (see also installation or
➢
service manual)
Final performance test and mount side wall.
➢
carried out in reversed order. Both gaskets [5] (MM211142) must be
5
35