SmartCombi™ & ClassicCombi™ Service
Pressure switch replacement instructions
Valid for:
SmartCombi ClassicCombi MM202601
Arrangements:
Disconnect the unit from the power supply. Close water tap on site and relieve pressure on the supply
site. Remove left side panel.
Disassembling:
Remove both wires from the pressure switch [1].
➢
3
Pull out spring clip [2]
➢
Take out the pressure switch [3].
➢
Montage:
The assembly
has to be
➢
Final function test.
➢
Mount side panel.
➢
1
2
carried out in reversed order.
No.12 HD_04/2008
23