Delta SCARA DRS40L Series User Manual page 9

Delta SCARA Robot System User Manual
Usage and operating safety














Please read this manual carefully before usage in order to ensure proper
usage and the safety of the maintenance staff.
Due to operational environment and operator safety considerations, our
company will provide dedicated training for the operators of different robot
applications in order to ensure usage safety. Please contact our company
or your local dealers if training is needed.
Please perform wiring properly according to this manual; wiring must be
performed by personnel with related professional knowledge or licenses.
Please use our company's handheld teaching pendant (DTS-2FM) and
install it on the controller DCS-1B00-CA to perform manual operations and
edit programs.
Cannot be used on production lines that are flammable, explosive, toxic or
has the risk of being sprayed by liquids.
Please select a suitable model according to the load capability; do not
overuse specifications that exceed the machine model specifications.
The robot is a partially completed machine; the assembly and construction
of the protection and safety circuit should be the responsibility of the final
system integrator.
All children and visitors should keep a safe distance from the processing
area.
Do not wear loose clothes, ties, rings or bracelets and wear protective nets
to protect long hair as these things can easily get caught in the machine by
accident and cause injuries to the staff or cause other dangers during
operation.
Please turn off the power, isolate the power properly and wait for the robot
to stop completely when the robot is no longer used before you leave.
Please confirm that there is no one along the railings before operating the
robot and performing operations.
Do not laugh or talk to other workers while operating the robot; such wrong
behaviors may result in collision of the robot or injuries to other workers.
Please use the two-stage key selection switch to change between T1 and
Auto mode; the keys must be able to be unplugged in both modes .
Please have the senior supervisor keep the T1/Auto mode selection switch
key; do not place it randomly or leave it inserted on the selection switch as
doing so may result in other personnel activating the robot accidentally,
causing injuries to the workers.
9
SCARA CE Series