Delta SCARA DRS40L Series User Manual page 5

Delta SCARA Robot System User Manual
Safety Notice
This manual includes safety precautions on user safety and how to prevent the robot from getting
damaged, warnings and notes are used in this manual to describe how important these safety
precautions are. Warnings are used to describe supplementary explanations, users must read the items
in the warning, danger and stop carefully in order to prevent accidents or causing injuries to the staff.
The installation and transportation of the robot should be executed by qualified personnel and should
comply with the regional / country and local laws and regulation requirements.
The integration of the robot and the robot's peripherals as well as the construction of the safety
protection device should be executed by the final system integrator in order to ensure the overall safety
of the system.
This robot was designed only as an accessory for specific applications. We strongly suggest that this
robot should not be modified and / or used for any application processes other than what it was
designed for. If you have any application problems, please do not use the robot until you have received
detailed explanations from your dealer.
Definition of operators
The definition of robot operators is as follows.
Operator

Able to perform operations such as powering the controller ON/OFF.

Able to start the robot from the final system integrated operation panel.
Program editor

Performs the operations on the robot.

Uses manual mode to operate the robot or teach points, etc. outside the safety railings.
Repair or inspection personnel

Perform simple operations of the robot.

Uses manual mode to operate the robot outside the safety railings.

Performs operations such as maintenance, repairs, adjustment and replacement, etc. to the
robot and controller.
FIRST RUN,
Product conforms to the Machinery Directive 2006/42/EC, Low Voltage Directive 2014/35/EU, EMC
Directive 2014/30/EU and related standards EN ISO 12100, EN ISO 10218-1, EN ISO 13857, EN ISO
4414, EN ISO 13849-1, EN60204-1, EN 61000-6-2, EN 61000-6- 4, EN 61000-3-2, EN 61000-3-3.
Note: Please read the manual carefully before operating, maintaining or inspecting the robot and
controller, and make sure to follow the safety regulations. Please contact our company for details if you
have any questions.
5
SCARA CE Series