Table of Contents
Advertisement
CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
Fuel supply system, petrol engines - Edition 05.2019
– Pull fuel gauge sender - G- slightly to side and upwards at the
same time.
– If the sender cannot be released in this way, push the securing
tabs -arrows- to the side slightly.
– Note colour assignment of cables for re-installation.
– Release and pull off connectors -1...3- and bend back the
locking hooks of connectors.
Installing
– Connect connectors -1...3-. Note colour assignment.
– Check connectors are secured properly by pulling.
– Insert fuel gauge sender - G- into guide on fuel delivery unit
and press down until it engages.
– Install fuel delivery unit
Specified torque
♦
⇒ "2.1 Assembly overview - fuel delivery unit/fuel gauge send‐
er", page 41
♦
⇒ "1.1 Assembly overview - fuel tank", page 6
9.2
Removing and installing fuel gauge
sender 2 - G169-
Special tools and workshop equipment required
112
Rep. gr.20 - Fuel supply system
⇒ page 46
.
Hide quick links:
Advertisement
Table of Contents
