Removing And Installing Wiring Harness With 8-Pin Connector (For Sender) - Volkswagen Golf Variant 2007 Workshop Manual

– Tighten bolt for 14-pin gearbox connector; torque specification
⇒ page 89 .
– Tighten securing bolts for gearbox speed sender connector
retainers; torque specifications
– Tighten bolt on bracket of gearbox oil temperature sender -
G93- , torque setting
– Install ATF strainer ⇒ page 85
– Install oil pan ⇒ page 82
4.4 Removing and installing wiring harness
with 8-pin connector (for sender)
4.4.1 Removing
– Remove oil pan ⇒ page 82
– Remove ATF strainer
– If present, carefully pull off connectors for automatic gearbox
hydraulic pressure sender 1 -G193- -1- and automatic gearbox
hydraulic pressure sender 2 -G194- -4-.
Senders -1- and -4- are not installed in all gearboxes.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
⇒ page 89 .
⇒ page 89 .
.
.
.
⇒ page 85 .
6-speed automatic gearbox 09G - Edition 04.2010
105
4. Valve body