Volkswagen CC 2012 Workshop Manual page 12

CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
Fuel supply system, petrol engines - Edition 05.2019
1.1.2 Assembly overview - fuel tank, vehicles with front-wheel drive with engine
codes CBFA, CCTA, CNNA
1 - Fuel line
❑ Ensure firm seating
2 - Cap
❑ Renew if damaged
3 - Securing bolt
4 - Tank flap unit
❑ With rubber cup.
❑ Removing and installing
⇒ General body repairs,
exterior; Rep. gr. 55 ;
Tank flap unit; Remov‐
ing and installing fuel
tank flap unit .
5 - Breather line
❑ Clipped onto fuel tank
❑ Ensure firm seating
6 - Vacuum line
❑ Clipped onto fuel tank
❑ Ensure firm seating
7 - Earth connection
❑ To protective plate for
filler neck.
❑ Ensure firm seating
8 - Earth connection
❑ Ensure firm seating
❑ Ensure good contact to
body.
9 - Clip
10 - Fuel
❑ Emptying ⇒ page 14
❑ Removing and installing
❑ When removing, support using engine and gearbox jack - V.A.G 1383 A- .
11 - Securing straps
❑ Use suitable workshop equipment to prevent the securing straps from turning while tightening the bolts.
12 - Heat shield
13 - Clamping washer
14 - Bolt
❑ Renew after removal
❑ 25 Nm
15 - Seal
❑ Renew after removal
❑ When installing, fit dry in fuel tank opening.
❑ Moisten with fuel only when installing flange.
16 - Fuel delivery unit
❑ Removing and installing
8
Rep. gr.20 - Fuel supply system
⇒ page 26
⇒ page 41