Volkswagen CC 2012 Workshop Manual page 15

❑ Removing and installing
14 - Fuel
❑ Emptying ⇒ "1.2 Emptying fuel tank", page 14
❑ Removing and installing
⇒ "1.3.2 Removing and installing fuel tank - vehicles with four-wheel drive", page 31
15 - Heat shield
❑ Bolted with clamping washers.
16 - Bolt
❑ Renew after removal
❑ 25 Nm
17 - Securing straps
❑ Use suitable workshop equipment to prevent the securing straps from turning while tightening the bolts.
18 - Breather line
❑ Clipped onto fuel tank
❑ Ensure firm seating
❑ To activated charcoal filter solenoid valve 1 - N80-
19 - Fuel delivery unit
❑ Removing and installing
❑ If fuel delivery unit was renewed, adapt engine control unit to fuel pump ⇒ Vehicle diagnostic tester
"Guided function"
❑ Checking fuel pump
❑ With fuel gauge sender - G-
❑ Removing and installing fuel gauge sender - G-
❑ Clean strainer if soiled
20 - Flange with fuel filter
❑ With 6.2 bar pressure relief valve
❑ Note installation position on fuel tank
❑ Removing and installing
❑ Can be disconnected from fuel delivery unit
CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
Fuel supply system, petrol engines - Edition 05.2019
⇒ "9.2 Removing and installing fuel gauge sender 2 G169 ", page 112
⇒ page 43
⇒ page 73 .
⇒ page 42
⇒ page 43
⇒ page 111
⇒ page 46 .
11
1. Fuel