CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
Fuel supply system, petrol engines - Edition 05.2019
Version 1
Plug-in connector with release buttons -arrows- on right and left:
Open
Counterhold at the coupling point for fuel -1- in the engine com‐
partment.
– Insert lever - T10468- between heat shield and stop -arrow- of
fuel line -2- and counterhold.
Continuation for all coupling points on fuel system:
– Push plug-in connector -1- in -direction of arrow A-.
– Press and hold release buttons.
– Pull plug-in connector -1- off fuel line -2- in
-direction of arrow B-.
Note colour assignment during installation
Plug-in connectors for fuel lines must engage audibly when
joined.
– Ensure plug-in connector is secured properly by pulling it.
52
Rep. gr.20 - Fuel supply system
⇒ page 51
.