Table of Contents
Advertisement
– Open locking ring using wrench - T10202- .
– Do not cant key - T10202- and press against locking ring firmly.
If the key slips off, the fuel delivery unit can be damaged.
– Raise flange.
CAUTION
The fuel system is pressurised.
Danger of injury through fuel spray.
– Wear protective goggles.
– Wear protective gloves.
– To release pressure, wrap a clean cloth around the connec‐
tion and carefully loosen the connection.
– Insert extraction hose of fuel extractor - VAS 5190- as far as
possible into fuel tank.
– Then extract fuel.
If fuel tank needs only to be emptied, reinstall flanges with covers
⇒ page 25
.
Installing flanges with covers:
Install in reverse order of removal. Please observe the following:
♦ Moisten seal with fuel only when installing flange.
♦ Ensure that line connections are tight.
– Note installation position of flanges -arrows-:
•
Tab -2- on flange must be between lugs -1- and -3- on fuel
tank.
•
-Arrow- points in direction of travel.
A - Flange for fuel delivery unit
B - Flange for fuel gauge sender 2 - G169-
– Tighten locking ring using wrench - T10202- .
– Note installation position of covers -arrows-:
The -arrows- on the covers point forwards.
A - Cover for fuel delivery unit
B - Cover for fuel gauge sender 2 - G169-
Specified torque
♦
⇒ "2.1 Assembly overview - fuel delivery unit/fuel gauge send‐
er", page 41
♦ ⇒ General body repairs, interior; Rep. gr. 72 ; Rear seat;
Removing and installing bench seat / individual seats
CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
Fuel supply system, petrol engines - Edition 05.2019
25
1. Fuel
Hide quick links:
Advertisement
Table of Contents
