Assembly Overview - Fuel Tank, Vehicles With Four-Wheel Drive - Volkswagen CC 2012 Workshop Manual

CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
Fuel supply system, petrol engines - Edition 05.2019
1.1.3

Assembly overview - fuel tank, vehicles with four-wheel drive

1 - Supply line
❑ Clipped onto fuel tank
❑ Ensure firm seating
2 - Locking ring
❑ Ensure firm seating
❑ Remove and install us‐
ing wrench - T10202- .
❑ 110 Nm
3 - Cap
❑ Renew if damaged
4 - Securing bolt
❑ 1.5 Nm
5 - Tank flap unit
❑ With rubber cup.
❑ Removing and installing
⇒ General body repairs,
exterior; Rep. gr. 55 ;
Tank flap unit; Remov‐
ing and installing fuel
tank flap unit .
6 - Bolt
❑ 10 Nm
7 - Earth connection
❑ Ensure firm seating
8 - Pressure retention valve
with connecting hose
❑ To remove, grasp se‐
curing ring (grey) and
pull off upwards.
❑ Ensure firm seating
❑ From activated charcoal
filter
9 - Breather line
❑ Clipped onto fuel tank
❑ Ensure firm seating
❑ From activated charcoal filter
10 - Suction-jet pump
❑ Clipped onto fuel gauge sender 2 - G169-
❑ Removing and installing
11 - Bolt
❑ Renew after removal
❑ 25 Nm
12 - Seal
❑ Renew after removal
❑ When installing, fit dry in fuel tank opening.
❑ Moisten with fuel only when installing flange.
13 - Fuel gauge sender 2 - G169-
❑ Note installation position on fuel tank
10
Rep. gr.20 - Fuel supply system
⇒ page 106
⇒ page 42