Table of Contents
Advertisement
– Pull fuel gauge sender 2 - G169- upwards a little.
– Unclip locking lugs -arrows- of suction-jet pump.
Installing
Install in reverse order of removal. Please observe the following:
•
When installing do not bend fuel gauge sender 2 - G169- float
arm.
– Insert fuel gauge sender 2 - G169- into fuel tank.
– Push suction-jet pump onto sender inside fuel tank. Suction-
jet locking lugs -arrows- must engage.
– Insert seal for fuel delivery unit dry into opening of fuel tank.
– Coat inner side of seal with fuel.
– Push flange downwards against spring force and move flange
into installation position.
•
Tab -2- on flange must be between lugs -1- and -3- on fuel
tank.
•
-Arrow- points in direction of travel.
– Tighten sealing flange.
– Observe installation position of cover -B-.
The -arrow- on the cover points forwards.
B - Cover for fuel gauge sender 2 - G169-
Specified torque
♦
⇒ "2.1 Assembly overview - fuel delivery unit/fuel gauge send‐
er", page 41
♦
⇒ "1.1 Assembly overview - fuel tank", page 6
CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
Fuel supply system, petrol engines - Edition 05.2019
115
9. Senders and sensors
Hide quick links:
Advertisement
Table of Contents
