Table of Contents
Advertisement
CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
Fuel supply system, petrol engines - Edition 05.2019
Note
Plug-in connectors for fuel lines must engage »audibly« when
♦
joined.
Note colour assignment when installing the plug-in connectors
♦
⇒ page 51
.
Ensure plug-in connector is secured properly by pulling it.
♦
Separate plug-in connectors
♦
Test conditions
•
Ignition must be switched off.
Test sequence
– Pull off bleeder line -2-. Separate plug-in connectors
⇒ page 51
.
– Connect hand vacuum pump - VAS 6213- with connection line
- VAS 6550/3-2- -A- to breather line as shown.
– Move slide ring -1- on hand vacuum pump - VAS 6213- to po‐
sition -A- for vacuum.
– Operate hand vacuum pump - VAS 6213- several times. There
must be no development of vacuum.
– Remove right rear wheel.
– Remove rear right wheel housing liner ⇒ General body re‐
pairs, exterior; Rep. gr. 66 ; Wheel housing liner; Assembly
overview - rear wheel housing liner .
68
Rep. gr.20 - Fuel supply system
⇒ page 51
.
Hide quick links:
Advertisement
Table of Contents
