Volkswagen CC 2012 Workshop Manual page 16

CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
Fuel supply system, petrol engines - Edition 05.2019
1.1.4 Assembly overview - fuel tank, vehicles with four-wheel drive with engine
code CNNA
1 - Supply line
❑ Clipped onto fuel tank
❑ Ensure firm seating
2 - Locking ring
❑ Ensure firm seating
❑ Remove and install us‐
ing wrench - T10202- .
❑ 110 Nm
3 - Cap
❑ Renew if damaged
4 - Securing bolt
❑ 1.5 Nm
5 - Tank flap unit
❑ With rubber cup.
❑ Removing and installing
⇒ General body repairs,
exterior; Rep. gr. 55 ;
Tank flap unit; Remov‐
ing and installing fuel
tank flap unit .
6 - Breather line
❑ Clipped onto fuel tank
❑ Ensure firm seating
7 - Vacuum line
❑ Clipped onto fuel tank
❑ Ensure firm seating
8 - Earth connection
❑ To protective plate for
filler neck.
❑ Ensure firm seating
❑ Fitting position ⇒ page 26
9 - Earth connection
❑ Ensure firm seating
❑ Ensure good contact to body
❑ Fitting position ⇒ page 26
10 - Clip
11 - Suction-jet pump
❑ Clipped onto fuel gauge sender 2 - G169-
❑ Removing and installing
12 - Bolt
❑ Renew after removal
❑ 25 Nm
13 - Seal
❑ When installing, fit dry in fuel tank opening.
❑ Moisten with fuel only when installing flange.
❑ Renew after removal
12
Rep. gr.20 - Fuel supply system
⇒ page 106