General Configuration Mode; Table 69 Command Summary: Configuration Mode - ZyXEL Communications Dimension ES-3148 User Manual

Dimension ES-3148 User's Guide

31.9.3 General Configuration Mode

The following table lists the commands in Configuration (or Config) mode.

Table 69 Command Summary: Configuration Mode

COMMAND
help
logout
history
exit
mode zynos
password <password>
no ip
igmp-filtering
igmp-snooping
mac-forward
mac-filter
mirror-port
208
route <ip> <mask>
route <ip> <mask>
inactive
profile <name>
profile <name>
start-address
<ip> end-address
<ip>
mac <mac-addr>
vlan <vlan-id>
interface
<interface-id>
mac <mac-addr>
vlan <vlan-id>
interface
<interface-id>
inactive
mac <mac-addr>
vlan <vlan-id>
inactive
mac <mac-addr>
vlan <vlan-id>
Chapter 31 Introducing the Commands
DESCRIPTION
Displays help information.
Exits from the CLI.
Displays a list of previous
command(s) that you have
executed.
Exits from the CLI.
Changes the CLI mode to the
ZyNOS format.
Change the password for
Enable mode.
Sets the management IP
address to the default value.
Removes a specified IP static
route.
Enables a specified IP static
route.
Clears the IGMP filtering
settings on the switch.
Deletes the IGMP filtering
profile.
Deletes a rule in the IGMP
filtering profile.
Disables IGMP snooping.
Removes the specified MAC
forwarding entry, belonging to a
VLAN group (if any) forwarded
through an interface(s).
Enables the specified MAC
address, belonging to a VLAN
group (if any) forwarded through
an interface(s).
Enables the specified MAC-filter
rule.
Disables the specified MAC
filter rule.
Disables port mirroring on the
switch.