Enable Mode; Table 72 Command Summary: Enable Mode - ZyXEL Communications ZyXEL Dimension ES-2048 User Manual

Table 71 Command Summary: User Mode (continued)
COMMAND
<IP|host-name> [vlan
<vlan-id>]
[size <0-1472>]
[-t]
help
traceroute <ip|host-name>
<ip|host-name>
[vlan <vlan-id>]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
help
ssh <1|2> <[user@]dest-
ip>

31.11.2 Enable Mode

The following table describes the commands available for Enable mode.

Table 72 Command Summary: Enable Mode

COMMAND
help
logout
exit
history
enable
disable
configure
stk-port-
test
no logging
arp
interface <port-
number>
show ip
Chapter 31 Introducing Commands
DESCRIPTION
Sends Ping request to an Ethernet device in the
specified VLAN(s) with the specified parameters.
Displays command help information.
Determines the path a packet takes to a device.
Determines the path a packet takes to a device in a
VLAN.
Displays command help information.
Connects to an SSH server with the specified SSH
version.
DESCRIPTION
Displays help information.
Exits Enable (or privileged) mode. 13
Exits Enable (or privileged) mode. 13
Displays a list of command(s) that
you have previously executed.
Accesses Enable (or privileged)
mode.
Exits Enable (or privileged) mode. 13
Accesses Configuration mode.
See
Tests stack port list.
Clears system logs.
Flushes the ARP (Address
Resolution Protocol) table.
Clears the interface status of the
specified port(s).
Displays IP related information.
arp Displays the ARP table.
Displays TCP related information. 13
tcp
ES-2048 User's Guide
Section 31.11.3 on page 224.
PRIVILEGE
0
0
0
0
0
0
PRIVILEGE
13
13
13
13
13
13
13
13
13
13
219