Voip Trunking Application 2 – Voip Phone To Regular Phone With Peer Call - ZyXEL Communications P-2302HWUDL-P1 Support Notes

VoIP Trunking Application 2 – VoIP Phone to Regular Phone with Peer Call
Making peer call automates the dialing procedure described above by using
configuring outgoing
How to Make Phone Call from VoIP Phone to Regular Phone with Peer Call?
1. Dial a Speed Dial Entry
entry consists of a PSTN phone number and a destination IP address of the ZyXEL trunking gateway
device (B).
2. The ZyXEL Trunking Gateway (B) picks up the call. It inspects the phone number dialed and
determines that this is a number it should connect your call to.
3. It requests the authentication information from the ZyXEL Trunking Device (A).
4. Once the authentication is passed, the ZyXEL Trunking Gateway (B) connects your call to the PSTN
number you dialed (Phone 2).
Configuration Details:
The ZyXEL Trunking Device (A) needs to have the following configuration settings:
Apply the following SIP configuration –
1.
and DTMF Mode
dump in SIP Configuration Criteria for VoIP Trunking Application)
2. A speed dial entry destinated to the ZyXEL Trunking Gateway Device (B) needs to be set up. (VoIP
> Phone Book > Speed Dial) Enter the destination phone number. The number here is the PSTN
number of the phone 2. As this is a peer call entry, select Non-Proxy type.
authentication.
from phone 1 connected to FXS of the ZyXEL Device (A). The speed dial
field needs to be set to
All contents Copyright  2007 ZyXEL Communications Corporation.
P2302HWUDL-P1 Support Notes
Primary Voice Compression
SIP INFO. (Please refer to the above configuration screen
speed dial entries and
field needs to be set to G.729
113