Table of Contents
Advertisement
Chapter 2 Tutorials
Once you're in the Web Configurator, you can assign the NVG2053 a new Local
3
Area Network (LAN) IP address. This allows you to position in your LAN topology
where it is most beneficial to you. See
If you were given settings to configure the NVG2053's WAN connection, then you
4
can do so in
Finally, if you have a SIP account and want to place phone calls over the Internet,
5
see
Section 2.3 on page
2.3 How to Make a VoIP Call
The NVG2053 allows you to plug an analog phone into it and place calls over the
Internet to another VoIP device as if you were using an IP Phone or a SIP phone.
Making Internet phone calls requries that first have a SIP account set up with
either your ISP (if they provide such a service) or a third-party SIP provider.
2.3.1 VoIP Calls With a Registered SIP Account
To use a registered SIP account, you should have applied for a SIP account with
the VoIP service provider and got account information from your provider.
This section shows you examples of how to register your SIP account on the
NVG2053 and make Internet calls.
The following table shows the SIP account and SIP server address provided by
your service provider.
SIP Account
SIP Server Address
User Name
Password
2.3.1.1 SIP Account Registration
Follow the steps below to register and activate your SIP account.
Make sure your NVG2053 is connected to the Internet.
1
Open the web configurator and go to VoIP > SIP.
2
Select the SIP service provider profile you want to configure and give it a name
3
("SIPSP-1" for example).
28
Section 7.3 on page
83.
28.
12345678@voipprovider.com
127.1.2.3
username123
password123
Section 9.4 on page 123
for details.
NVG2053 User's Guide
Advertisement
Table of Contents
