Sip Qos Screen; Figure 81 Voip > Sip > Qos - ZyXEL Communications P-2302HWUDL-P1 Series User Manual

P-2302hwudl-p1 series 802.11g wireless voip station gateway with built-in dect base station
Hide thumbs Also See for P-2302HWUDL-P1 Series:
Table of Contents

Advertisement

Table 63 VoIP > SIP > SIP Settings > Advanced
LABEL
Enable
Expiration Time
Call Forward
Call Forward
Table
Caller Ringing
Enable
Caller Ringing
Tone
On Hold
Enable
On Hold Tone
<Back
Apply
Cancel

9.3.3 SIP QoS Screen

Use this screen to maintain ToS and VLAN settings for the ZyXEL Device. To access this
screen, click VoIP > SIP > QoS.
Figure 81 VoIP > SIP > QoS
P-2302HWUDL-P1 Series User's Guide
DESCRIPTION
Select this if you want to hear a waiting (beeping) dial tone on your phone when
you have at least one voice message. Your VoIP service provider must support
this feature.
Keep the default value, unless your VoIP service provider tells you to change it.
Enter the number of seconds the SIP server should provide the message waiting
service each time the ZyXEL Device subscribes to the service. Before this time
passes, the ZyXEL Device automatically subscribes again.
Select which call forwarding table you want the ZyXEL Device to use for incoming
calls. You set up these tables in VoIP > Phone Book > Incoming Call Policy.
Select the check box if you want to specify what tone people hear when they call
you. The ZyXEL Device provides a default tone, but you can add additional tones
using IVR. See
Section 9.2 on page 138
Select the tone you want people to hear when they call you. You should setup
these tones using IVR first. See
Select the check box if you want to specify what tone people hear when you put
them on hold. The ZyXEL Device provides a default tone, but you can add
additional tones using IVR. See
Select the tone you want people to hear when you put them on hold. You should
setup these tones using IVR first. See
information.
Click this to return to the SIP Settings screen without saving your changes.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
for more information.
Section 9.2 on page 138
for more information.
Section 9.2 on page 138
for more information.
Section 9.2 on page 138
Chapter 9 SIP
for more
145

Advertisement

Table of Contents
loading

This manual is also suitable for:

P-2302hwud-p1

Table of Contents