Back To Factory Defaults; Restart Screen; Figure 57 Configuration Upload Error; Figure 58 Reset Warning Message - ZyXEL Communications ZyAIR G-3000 User Manual

Figure 57 Configuration Upload Error

10.6.3 Back to Factory Defaults

Pressing the Reset button in this section clears all user-entered configuration information and
returns the ZyAIR to its factory defaults as shown on the screen. The following warning screen
will appear.

Figure 58 Reset Warning Message

You can also press the RESET button on the side panel to reset the factory defaults of your
ZyAIR. Refer to the section on resetting the ZyAIR for more information on the RESET
button.

10.7 Restart Screen

System restart allows you to reboot the ZyAIR without turning the power off.
Click MAINTENANCE, and then Restart. Click Restart to have the ZyAIR reboot. This
does not affect the ZyAIR's configuration.
Chapter 10 Maintenance
ZyAIR G-3000 User's Guide
116