Back To Factory Defaults; Restart Screen - ZyXEL Communications WRE6606 User Manual

Figure 67 Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default WRE6606 IP address (192.168.1.2). Refer
to your operating system's help files for details on how to set up your computer's IP address.

13.7.3 Back to Factory Defaults

Click the Reset button to clear all user-entered configuration information and return the WRE6606
to its factory defaults. The following warning screen appears.
Figure 68 Reset Warning Message
You can also press the WPS button (see
10 seconds to reset the factory defaults of your WRE6606. Refer to
information on the resetting the WRE6606.

13.8 Restart Screen

System restart allows you to reboot the WRE6606 without turning the power off. Click
Maintenance > Restart. The following screen displays. Click Restart to have the WRE6606
reboot. This does not affect the WRE6606's configuration.
Figure 69 Maintenance > Restart
Chapter 13 Maintenance
Section 1.4 on page
WRE6606 User's Guide
89
12) on the front panel for more than
Section 1.4 on page 12 for more