Configuring Www; Figure 89 Remote Management: Www; Table 49 Remote Management: Www - ZyXEL Communications ZyXEL NWA3550 User Manual

13.8 Configuring WWW

To change your ZyXEL Device's World Wide Web settings, click REMOTE MGNT >
WWW.

Figure 89 Remote Management: WWW

The following table describes the labels in this screen.

Table 49 Remote Management: WWW

LABEL
WWW
Server Port
Server Access
Secured Client IP
Address
HTTPS
Server Certificate
Authenticate
Client Certificates
Server Port
NWA3550 User's Guide
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
A secured client is a "trusted" computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Select the Server Certificate that the ZyXEL Device will use to identify itself. The
ZyXEL Device is the SSL server and must always authenticate itself to the SSL
client (the computer which requests the HTTPS connection with the ZyXEL
Device).
Select Authenticate Client Certificates (optional) to require the SSL client to
authenticate itself with the ZyXEL Device by sending the ZyXEL Device a
certificate. To do that the SSL client must have a CA-signed certificate from a CA
that has been imported as a trusted CA on the ZyXEL Device (see the appendix on
importing certificates for details).
The HTTPS proxy server listens on port 443 by default. If you change the HTTPS
proxy server port to a different number on the ZyXEL Device, for example 8443,
then you must notify people who need to access the ZyXEL Device web
configurator to use "https://ZyXEL Device IP Address:8443" as the URL.
Chapter 13 Remote Management Screens
157