Chapter 9 Other Wireless Configuration
Figure 71 WIRELESS > Layer-2 Isolation Configuration Screen
The following table describes the labels in this screen.
Table 39 WIRELESS > Layer-2 Isolation Configuration
LABEL
Profile Name
Allow devices with
these MAC
addresses
Set
MAC Address
Description
Apply
Reset
9.3.1 Layer-2 Isolation Examples
The following section shows you example layer-2 isolation configurations on the ZyXEL
Device (A).
126
DESCRIPTION
Type a name to identify this layer-2 isolation profile.
These are the MAC address of a wireless client, AP, computer or router. A
wireless client associated with the ZyXEL Device can communicate with another
wireless client, AP, computer or router only if the MAC addresses of those devices
are listed in this table.
This is the index number of the MAC address.
Type the MAC addresses of the wireless client, AP, computer or router that you
want to allow the associated wireless clients to have access to in these address
fields. Type the MAC address in a valid MAC address format (six hexadecimal
character pairs, for example 12:34:56:78:9a:bc).
Type a name to identify this device.
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
ZyXEL NWA-3160 Series User's Guide