Galaxy Dimension And 2-Way Audio; Introduction; Audio Interface Module - Honeywell Galaxy Dimension Series Installer Manual

Hide thumbs Also See for Galaxy Dimension Series:
Table of Contents

Advertisement

Galaxy Dimension Installer Manual

Galaxy Dimension and 2-Way Audio

Introduction

The Galaxy Dimension allows multiple audio channels to be linked to the intruder system in order to provide
audio verification following an alarm activation. This will allow sound from the area of the alarm activation to
be transmitted to the Alarm Receiving Centre with the alarm signal. This can be recorded audio captured at
the time of the activation as well as live audio. Depending on the set-up, it may be possible for the operator at
the receiving centre to talk back to the site. An Audio Interface Module is required to enable audio on the
Galaxy. This allows up to two audio channels to be connected. If further channels are required, the audio
system can be expanded using the MUX modules. Each alarm group on the Galaxy can have one audio
channel assigned to it.

Audio Interface Module

The Audio Interface Module is connected to the Galaxy RS485 line to allow the panel to control the audio
function and connected to the PSTN line to allow it to transmit the audio signals to the Alarm Receiving Cen-
tre.
For expansion using MUX modules, the Audio Interface Module has connections for a high speed digital
audio bus in order to connect the MUX modules. Up to three speaker-mic devices, such as the TP800, can
be connected to each audio channel.
The Audio Interface Module acts as the master to a dedicated Audio RS485 line on to which 8 off-board
Mux Modules can be connected.
Telecom
Connect
Jumper lead
RS485
termination
Engineer Header
Audio Bus
SPARE
RS485
GND
Audio
Bus
Engineer Header
RS485 line
+12V
Galaxy
GND
RS485 line
Telecom
Socket
Off-wall Tamper
microswitch
Figure 3-6. Interface PCB
3-13
Audio Control
Audio Expansion
Fuse for
Header
+4.5V
NOTE: Audio Expansion
Header is not currently
used - it is for future
product development.
CMD 2
TMP 2
SPK 2
MIC 3
GND
+4.5V
CMD 1
TMP 1
SPK 1
MIC 1
Diagnostic
LED's
Audio Channel
Terminals (2)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents